Tecnoware UPS Evo DSP PLUS TM 20

390,000.00৳  N/A

Tecnoware UPS Evo DSP PLUS TM 20 

Local Area Network (LAN), Data Centres,Industrial equipment, Electromedical equipment Protection

  • Blackout
  • Dynamic Undervoltage
  • Dynamic Overvoltage
  • Undervoltage
  • Overvoltage
  • Lightning (UPS + surge discharger


  • Voltage Surge
  • Frequency Variation
  • Voltage Distortion
  • Voltage Harmonic

Main specifications

  • Multifunctional LCD display
  • Internal battery
  • On-Line Double Conversion

Technology without transformer


  • Rectifier realized by IGBT technology
  • Active PFC Circuit (0.99)
  • Wide input voltage tolerance
  • Compatible with Generators
  • EPO (Emergency Power Off)
  • Output voltage and frequency can be

regulated from the front panel

  • Battery recharge system managed

by microprocessor

  • Static and manual bypass
  • RS232 and USB communication ports
  • Intelligent slot for SNMP

or Dry Contact card

  • Expandable up to 3 units in parallel
  • High efficiency and low operating cost
  • Software di gestione UPS

Techno Manager compatible con

Windows, Mac OS X (up to version 10.8),

Unix, Linux, Ecc

5 in stock

SKU: GEPL_TECNOWARE_EVO_DSP_TM_20 Categories: , Tags: , ,

Tecnoware Evo DSP TM 20


Nominal power: 20 KVA

power factor: 16 KW

Power factor :0,8

Technology: on-line double conversation transformer fess (VFI-SS-111)

cooling: Fan cooling

Audible noise:  <60 dBA to 1 m

Dimension (UPS) : 25×82,6×81,5cm

Dimension (with packing): 38,5×102,5×92 cm


Number of phases: 3Ph+N

Nominal voltage:360Vac/380Vac/400Vac/415Vac

Input voltage range:176Vac-300Vac to 100% load, 110Vac-300Vac to 50% load

Nominal frequency: 50/60 Hz

Input frequency range (On-Line mode): ±7%

Input current harmonic distortion (THDi) : ≤4%

Input power factor : 0.99


Number of phases: 1ph+N

Nominal voltage: 208Vac/220Vac/230Vac/240Vac

Voltage Regulation at %100 ±1% linear load (On-Line and Battery mode): ±1%

Voltage THD at rated linear load :<2% (linear load) – <5% (distorting load)

Crest factor:  3:1

Frequency: 50/60 Hz

Free running frequency: ±0.2 Hz

Inverter waveform: Sinewave

Overload capability (On-line mode) : 110% for 10 minutes, 130% for 1 minute, >130% for 1 second .

Overload capability (Battery mode) :110% for 30 seconds, 130% for 10 seconds, >130% for 1 second

Efficiency:  94%, calculated in double conversion mode at 100% load according to standard 62040-3: 2011

Transfer time: 0 Ms (On-Line)

Output connections: Terminal block


Number of phases: 1ph+N

Nominal voltage:208Vac/220Vac/230Vac/240Vac

Voltage range: Low threshold 170Vac-220Vac (selectable) – High threshold 230Vac-264Vac (selectable)

Input frequency range (50Hz Nominal frequency) Low threshold: 46-48 Hz (selectable) – High threshold 52-54 Hz (selectable)

Input frequency range (60Hz Nominal frequency) Low threshold : 56-58 Hz (selectable) – High threshold 62-64 Hz (selectable)


Type: Lead acid, sealed, maintenance free

Batteries number: 40 (Installed inside)

Battery charge time (typical) : 6-8 hours

Nominal battery voltage: 240Vdc

Extended autonomy External Battery Box (optional)Interfacing

Interface (communication port) RS232 and USB


Dry Contact interfacing Yes (optional)

Software Techno Manager downloadable free from www.tecnoware.com (compatible with WINDOWS, UNIX, LINUX, Mac OS X up to version 10.8, SUN SOLARIS)

SNMP interface Internal module SNMP (compatible with WINDOWS, UNIX, LINUX, Mac OS X up to version 10.8, SUN SOLARIS) – optional

Parallel Configuration

Parallel interface Yes (optional)

Redundant parallel system Up to 3 units

Environmental specification

Storage temperature from -15 to 40 °C (for UPS with battery inside, see “Storage of batteries in UPS and Battery Box” graphic)

Working temperature from 0 to 40 °C (recommended from 20 to 25 °C, for longer battery life see “Battery life in service” graphic)

Humidity < 95% without condensation

Maximum altitude 3000 m

IP protection IP20

Certifications CE (Standards: Low Voltage Directive IEC EN 62040-1; EMC Directive IEC EN 62040-2; classification IEC EN 62040-3)


Standard 12 months of electronic parts and 12 months of batteries

Extensions Optional


Additional information






There are no reviews yet.

Be the first to review “Tecnoware UPS Evo DSP PLUS TM 20”

Your email address will not be published. Required fields are marked *